[ttribe]

Where on idrive do I go to see which software version I am running..

Also, how does the launch control work? Does it add another menu item to idrive?

Launch control does not add a menu. You've already got it, it's just not as spectacular as the Euro version. Go here to read more: http://www.m5board.com/vbulletin/e6...-m5-touring-discussion/113072-launch-control-illustrated-instructions-pics.html

 

[ttribe]

One more thing - subscribed...I'm REALLY hoping there might be someone in Arizona who knows how to do this. :biggrin:

 

[cartek]

Hey rob. I believe they are referring to being able to view your current software once you are already in the program.

There isn't an additional menu for launch control. It is inherently built into the car when Dsc is off and you are in S6.

If you do a search or rummage through the stickies there Is a thread pertaining to it.

 

[Rnydyman]

Launch Control Instructions:
1. Engage M Mode
2. Turn DSC OFF
3. Select " Maximum Shift Ferocity" (s6)
4. Hold selector forward
5. MASH gas pedal to the floor
6. Release the shift lever
7. Make alot of noise and tire smoke, and then eventually move on down the road at a high rate of speed
8. Shift at redline

 

[Rnydyman]

This is a vid of what Vodyk unlocked on my car - NOT ACTUALLY MY CAR

BMW M5 E60 Launch Control - YouTube

 

[robcassell]

Hey rob. I believe they are referring to being able to view your current software once you are already in the program.

There isn't an additional menu for launch control. It is inherently built into the car when Dsc is off and you are in S6.

If you do a search or rummage through the stickies there Is a thread pertaining to it.

Yeah I got that, I didn't know if there was a menu on iDrive that showed me which SMG version I was running:
M5 US
7840483 (ver 1)
7841402 (ver 2)
7842208 (ver 3)

 

[Vodyk]

Does this module also hold the # of times the cars been launched? If so does flashing it reset this figure?

I foresee a worldwide clutch shortage coming! Hah!

Haha i never thought to look to see where this is stored and if it backs itself up onto another module. The odometer goes to 4 modules and if one if off you get a temper light on the dash.

I see a couple of vague instructions in the pdf:

Using DIS or INPA clear any codes that may be stored in any modules.
10. Start the car and enjoy your improved shifts! You may need to run the SMG adaption procedures

In INPA and DIS you can see the adaptation your smg currently has. You can reset them or leave them and/or wait for the new adaptations. This is optional however if your smg isn't running smooth after a few miles of driving should be the next step.

Where on idrive do I go to see which software version I am running..

Also, how does the launch control work? Does it add another menu item to idrive?

You can't. Its INPA/DIS that can tell you your current version. No new menu/hidden information menu.

 

[Vodyk]

One more thing - subscribed...I'm REALLY hoping there might be someone in Arizona who knows how to do this. :biggrin:

It is intimidating at first however their is a lot of information on the topic and not hard once you are all setup.

7. Make alot of noise and tire smoke, and then eventually move on down the road at a high rate of speed
8. Shift at redline

The last two with the euro software should be the big difference, the smg will slip the clutch more to control wheel spin and auto shift for you at redline in LC mode even in S6.

 

[robcassell]

What is INPA/DIS?

 

[abomb60]

So I got the BMW Standard Tools but it has WinKFP 5.1.0 from 2004? The place I got it from said it was the INPA tools 5.0.2 and that they're the latest (post from 6/15/11).

 

[Vodyk]

http://zoink.it/torrent/AAD8168707278F1BB9C9A63EB240D56E69BE40B1.torrent

Here is a link to a torrent with everything you need for this.

 

[VeeralS05]

Anyone in the Atlanta area with the cables and software?

 

[spinny]

Downloading everything from your provided link right now. Will I need anything else?

Also, is this the right connector? Interface USB OBD2 II BMW Inpa K + CAN for sale at Gadgettown.com

I do not use paypal and the site you provided is paypal only. Thanks for bringing this to us, you are awesome!! Hopefully I can figure out how to code my windows/mirrors to go up when locking the car and unlock a few other things.

 

[335xi]

As far as needing a power supply

http://zoink.it/torrent/AAD8168707278F1BB9C9A63EB240D56E69BE40B1.torrent

Here is a link to a torrent with everything you need for this.

Would a fully charged battery and this:

Amazon.com: CTEK Multi US 7002 12V Battery Charger: Automotive


be sufficient?

 

[messex]

Downloading the software now - thanks for the link. I already have the cable, but haven't played much with it yet.

 

[messex]

Anyone in the Atlanta area with the cables and software?

I'm in Greenville, SC area - since I haven't done this yet, not sure I could help, until I finish the software download, hook up my cable and see how this whole thing works. Since I'm a computer programmer by profession, I'm hoping I can figure it out. Will let you know...

Mark

 

[robcassell]

Messex I'm in Charlotte, let me know how it goes... If there's anyone in charlotte with software and cable and is successful pm me

 

[VeeralS05]

I'm in Greenville, SC area - since I haven't done this yet, not sure I could help, until I finish the software download, hook up my cable and see how this whole thing works. Since I'm a computer programmer by profession, I'm hoping I can figure it out. Will let you know...

Mark

I'll be up there the first week of October.. maybe I can stop by... let me know how it works out!

 

[messex]

I'll be up there the first week of October.. maybe I can stop by... let me know how it works out!

Hopefully I'll get a chance to check it out b/w now and then. Been wanting to get into this for a while now (had the cable for months), but this software may help a bit. I'll let you know how it goes.

 

[messex]

Messex I'm in Charlotte, let me know how it goes... If there's anyone in charlotte with software and cable and is successful pm me

Will do...hopefully I don't brick my car!