All done! Rms fab F10 M5/M6 catless downpipes! - BMW M5 Forum and M6 Forums
F10 M5 Discussion 2010- Discussion about the next upcoming generation M5 based on the next generation 5-series, the F10.

 1Likes
  • 1 Post By BlackPLM5
 
LinkBack Thread Tools Rate Thread Display Modes
post #1 of 9 Old 19th October 2018, 01:53 AM Thread Starter
BlackPLM5
Member, P500, DSC On (>600)
 
BlackPLM5's Avatar
 
Join Date: Sep 2012
Location: Cleveland
Posts: 616
Thanks: 1
Thanked 27 Times in 24 Posts
All done! Rms fab F10 M5/M6 catless downpipes!

Thank you to everyone for all your patience these were certainly a challenge to do correctly. No corners cut here guys! Only 4 weld seams, 3.5 to 3 inch 304 SS, and like always aerospace Tig welding quality you've come to expect.

One thing everyone demanded was factory 02 sensor placement which I did to make things easier. Unlike most companies you get to see the quality of the welding up close!

Thanks for looking! PM me for any additional questions.

Ryan
Attached Thumbnails
IMG_20181018_194248_897_1539906752035.jpg   IMG_20181017_221326_823_1539906772650.jpg   IMG_20181017_220316_737_1539906786641.jpg  

RMS Fabrications - Contact Ryan though M5board.com
[email protected] or by phone via text/call
4404794247
YouTube channel: RMS Fabrications

Your #1 source for M5/M6 vband decat headers

Currently with 9 years welding in the aerospace industry I am also
glad to announce I am now CWI (certified welding inspector)certified in D1.1 Structural Steel and just recently D17.1 Aerospace code.

Now offering an excellent labor rate on all maintenance for you guys....vanos solenoids, lines, vanos pumps, and rod bearings.
BlackPLM5 is offline  
The Following User Says Thank You to BlackPLM5 For This Useful Post:
1320racer (19th January 2019)
Sponsored Links
Advertisement
 
post #2 of 9 Old 19th October 2018, 01:56 AM Thread Starter
BlackPLM5
Member, P500, DSC On (>600)
 
BlackPLM5's Avatar
 
Join Date: Sep 2012
Location: Cleveland
Posts: 616
Thanks: 1
Thanked 27 Times in 24 Posts
Heres the finished pic
Attached Thumbnails
IMG_20181018_194248_897_1539906968424.jpg  

RMS Fabrications - Contact Ryan though M5board.com
[email protected] or by phone via text/call
4404794247
YouTube channel: RMS Fabrications

Your #1 source for M5/M6 vband decat headers

Currently with 9 years welding in the aerospace industry I am also
glad to announce I am now CWI (certified welding inspector)certified in D1.1 Structural Steel and just recently D17.1 Aerospace code.

Now offering an excellent labor rate on all maintenance for you guys....vanos solenoids, lines, vanos pumps, and rod bearings.
BlackPLM5 is offline  
post #3 of 9 Old 19th October 2018, 02:03 AM Thread Starter
BlackPLM5
Member, P500, DSC On (>600)
 
BlackPLM5's Avatar
 
Join Date: Sep 2012
Location: Cleveland
Posts: 616
Thanks: 1
Thanked 27 Times in 24 Posts

RMS Fabrications - Contact Ryan though M5board.com
[email protected] or by phone via text/call
4404794247
YouTube channel: RMS Fabrications

Your #1 source for M5/M6 vband decat headers

Currently with 9 years welding in the aerospace industry I am also
glad to announce I am now CWI (certified welding inspector)certified in D1.1 Structural Steel and just recently D17.1 Aerospace code.

Now offering an excellent labor rate on all maintenance for you guys....vanos solenoids, lines, vanos pumps, and rod bearings.
BlackPLM5 is offline  
 
post #4 of 9 Old 24th October 2018, 05:05 PM
540wagon
Member
 
Join Date: Nov 2014
Location: Jax Beach
Posts: 38
Thanks: 0
Thanked 0 Times in 0 Posts
Garage
I am very interested, can you tell me the details n them, Price, and do you have a video of them on a car? I can not PM yet

George
540wagon is offline  
post #5 of 9 Old 24th October 2018, 05:14 PM Thread Starter
BlackPLM5
Member, P500, DSC On (>600)
 
BlackPLM5's Avatar
 
Join Date: Sep 2012
Location: Cleveland
Posts: 616
Thanks: 1
Thanked 27 Times in 24 Posts
Email at : [email protected]
Instagram message me at : rmsfabryan
Also you guys can call/text anytime 4404794247

Thanks
Ryan
Rms fabrications

RMS Fabrications - Contact Ryan though M5board.com
[email protected] or by phone via text/call
4404794247
YouTube channel: RMS Fabrications

Your #1 source for M5/M6 vband decat headers

Currently with 9 years welding in the aerospace industry I am also
glad to announce I am now CWI (certified welding inspector)certified in D1.1 Structural Steel and just recently D17.1 Aerospace code.

Now offering an excellent labor rate on all maintenance for you guys....vanos solenoids, lines, vanos pumps, and rod bearings.
BlackPLM5 is offline  
post #6 of 9 Old 19th January 2019, 06:37 AM
1320racer
Junior Member, warming up (<31 posts)
 
Join Date: May 2014
Location: Maryland
Posts: 4
Thanks: 1
Thanked 0 Times in 0 Posts
Video of catless down pipes from RMS Fabricationss

I located this clip on their YouTube channel...

The video is a bit choppy and it is difficult to determine how they actually sound due to phone mic. It appears the vehicle has the full OEM/standard exhaust with install of catless down pipes. This is likely the route I'd like to take too.
[YOUTUBE][/YOUTUBE]
https://youtu.be/5xSXH4kQ-vA
1320racer is offline  
post #7 of 9 Old 10th May 2019, 02:05 AM
BimmerBuster
Junior Member, warming up (<31 posts)
 
Join Date: May 2019
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Sueing RMS - contact me to give statement of **** work

Ryan, I am a motor sports enthusiast who spent $60,000 with Osh in 2018 and he stole $39,000 and left me with a rusty bucket of and e28 literally filled with a foot of water!!!! He still has the remaining trim pieces. I am gonna be pulling any one who worked for Osh into court into this lawsuit, Tex Jr. Etc.... I am talking to tons of people in the industry who says Osh has simply robbed them. Lied stole, delayd builds, and done tons of damage. I am collecting all this contact information and forwarding to my Lawyer and CA BAR. I am looking to gather. Please feel free to contact me @ 310-625-2928 . [email protected]

If you support him - you will need a lawyer. Anyone who supports him will need a lawyer, or you can start feeding me the real stories on Osh and RMS so we can put him in Jail.

- John
BimmerBuster is offline  
post #8 of 9 Old 10th May 2019, 02:09 AM
BimmerBuster
Junior Member, warming up (<31 posts)
 
Join Date: May 2019
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Jim Conforti Texted me last night that hes known Osh for 22 years. Osh has been a dirtbag that whole time. He confirmed he is a complete thief and devaluer to the BMW Community. - Any **** head can learn to use a CnC machine. He is **** as a human. Stealing from his own customers that have tried to look past it the first coupel times, until you literally see your investment destroyed because he just doesn't care.
BimmerBuster is offline  
post #9 of 9 Old 10th May 2019, 02:27 AM Thread Starter
BlackPLM5
Member, P500, DSC On (>600)
 
BlackPLM5's Avatar
 
Join Date: Sep 2012
Location: Cleveland
Posts: 616
Thanks: 1
Thanked 27 Times in 24 Posts
I have 0 idea who you are talking about. You must have me confused with someone else. I run a small fab shop by myself I'm not affiliated with anyone let alone this person you speak of. If you could please delete your posts that have nothing to do with my fab work. Thank you
Ryan

RMS Fabrications - Contact Ryan though M5board.com
[email protected] or by phone via text/call
4404794247
YouTube channel: RMS Fabrications

Your #1 source for M5/M6 vband decat headers

Currently with 9 years welding in the aerospace industry I am also
glad to announce I am now CWI (certified welding inspector)certified in D1.1 Structural Steel and just recently D17.1 Aerospace code.

Now offering an excellent labor rate on all maintenance for you guys....vanos solenoids, lines, vanos pumps, and rod bearings.
BlackPLM5 is offline  
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the BMW M5 Forum and M6 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes Rate This Thread
Linear Mode Linear Mode
Rate This Thread:



Similar Threads
Thread Thread Starter Forum Replies Last Post
RMS Fab soon to offer F10 downpipes BlackPLM5 F10 M5 Discussion 1 5th September 2018 05:24 PM
RMS fab needs oem f10 downpipes BlackPLM5 F10 M5 Discussion 7 29th April 2018 03:13 AM
Evolve Catless Downpipes F10 M5 F13 M6 [email protected] M5 F10 Group Buy Forum and Sponsor Discussion and Offerings 19 7th November 2017 04:45 PM
F10 M5 RPi GTM Exhaust: Now with Custom Fully Catless Downpipes. LOUDEST F10 M5 in the world! BMWDave F10 M5 Discussion 20 14th June 2017 01:38 AM
F10 For Sale: F10 M5/M6 RPI Catless Downpipes AKBMW Exhaust Discussion, For Sale, or Wanted 11 24th August 2015 08:17 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome