Member, Sport: Off DSC: On (>50 posts)
Join Date: Jan 2018
Thanked 0 Times in 0 Posts
I'm under Win 7 Pro in 32bit. I've tried this method and 2 others to get NCS to work with my cable without success.
Software seems to work just fine, NCS 4.0.1 / Ediabas 7.3.0 are running fine. I use a new cable I just received from Amazon. Ediabas seem to "sense" the car fine, identifying when the cable is hooked up and the car is switch to ON/OFF position.
But when trying to access the E39 chassis in NCS, I chosse exprertmode, and IKE ECU I always get the "Vin is faulty" error.
Anyone care to guess what might be wrong?
Side note, I've not the Registry update, the Com 1 and latency config etc... and everything checks out Ok in OBD Setup.
01' M5 Silver
08' M3 Sedan white
02' M3 Coupe Silver