UUC Clutch Stop Fix
Hi,
Finally got the UUC Fatboy clutch stop installed. No need to mess with the clutch senor. I just had to cut about 1/2' off the bolt, then screw it down really tight (but only by hand). It is now razor perfect delivering the absolute minimum of pedal travel. MUCH MUCH MUCH nicer for clean shifts.
But it is SO close to the clutch sensor limit that on occasion (why I don't know-maybe just thermal expansion), that sometimes I can't start the car without pressing the clutch down firmly. Still, I know that for sure it is adjusted just as close as it can be.
Cheers.
Finally got the UUC Fatboy clutch stop installed. No need to mess with the clutch senor. I just had to cut about 1/2' off the bolt, then screw it down really tight (but only by hand). It is now razor perfect delivering the absolute minimum of pedal travel. MUCH MUCH MUCH nicer for clean shifts.
But it is SO close to the clutch sensor limit that on occasion (why I don't know-maybe just thermal expansion), that sometimes I can't start the car without pressing the clutch down firmly. Still, I know that for sure it is adjusted just as close as it can be.
Cheers.
1 - 1 of 1 Posts
1 - 1 of 1 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
BMW M5 Forum and M6 Forums
M5Board is the best forum community for information on the BMW M5 E60 (V-10), E39 (V-8), E34 (straight 6), E28, F90 and F10. Discuss performance, specs, reviews and more!
Full Forum Listing
Recommended Communities
