BMW M5 Forum and M6 Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
655 Posts
without a doubt the best company in the west. I'm sure others will chime in and agree. They're in Fremont, so not exactly right down the street from you.

http://www.premiermobilegroup.com/

not 3M, they use Ventureshield which is superior.
 

·
Registered
Joined
·
128 Posts
deamoncharger,

There's also Invisi-Guard Automotive Film. They use a Llumar-based film with lifetime warranty (only to the original owner). I've had this film installed on my 550 and the front end was factory new till the day I sold her. If you have any questions, give Jeremy Gomez a call at 707-328-5865. He's mobile all over the Bay Area and has been installing clear masks for years. Tell him Roel from Salinas sent you.

http://www.invisi-guard.com/
 

·
Registered
Joined
·
227 Posts
I've used Invisigard before and although no major issues, there were some things that always bothered me about the laser cut stuff he used that never really matched both sides. It's hard to describe. One side there may be a 3mm difference from another. Premier definitely costs more, but I find that their quality is better than any I've ever tried.
 

·
Registered
Joined
·
2,881 Posts
without a doubt the best company in the west. I'm sure others will chime in and agree. They're in Fremont, so not exactly right down the street from you.

http://www.premiermobilegroup.com/

not 3M, they use Ventureshield which is superior.
Ventureshield is much better than 3M... especially on a white car. It doesnt have that yellowish hue to it...
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top