BMW M5 Forum and M6 Forums banner

Nav antennae doesnt work but...

670 Views 2 Replies 2 Participants Last post by  Kmac
My ant isnt working, the copper cable is broken in the middle on the new MKIV unit, but when I input a location at a cross-road, it always has me 180 degrees off. That I find wierd.

Sensor panel says something about the gps not functioning

but the GPS panel says I have 8 satellites and the wheel sensor is working fine.

Very strange on the 180 degree thing. Shouldnt the map (it does track btw) work even if the ant. doesnt?

Went from MKII to MKIV so I have removed the trimble unit (As bimmernav says to do) and converted to a BM53 radio using their adapter harness.

Wierd. Will do more searching.
1 - 2 of 2 Posts

· Registered
548 Posts
Discussion Starter · #3 ·
Thanks for the info D, the copper wire on the nav unit that makes it "male" was not there (or broken), so I took apart the trimble unit and made the gps antenna on the car male and after a few tries, success. For now.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.