BMW M5 Forum and M6 Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1,177 Posts
Discussion Starter #1
Our friends at Velocity Motoring have got a special wheel for everyone the V710, all the information fitments and so forth in this article what you've wanted to know. Check out the up to date picture:
http://www.modbargains.com/showpages.aspx?pid=1289
Velocity at Bimmerfest
By: James Yi
Introducing the New Velocity Motoring V710 Wheel

Just who I wanted to see-the infamous Velocity Motoring! When I heard that they were one of the larger vendors supporting Bimmerfest, I just knew they had something big. I decided to go over to their booth and get some information about any upcoming products that they may have.
Not surprisingly, Velocity had a new wheel and gauge for Bimmerfest! The wheels were called the Velocity V710. A 7 spoke, dual-spoke, 19" staggered (19x8.5 and 19x9.5 to be specific) wheels with a planned Hypersilver finish. Their offsets on these wheels were ET35 and possible ET20 in the front, and ET22, 33, and 45 in the rear. Those offsets are just what BMW enthusiasts will be looking for because the offset combinations work with practically every BMW! Of course, with such a nice looking wheel, the price could only be heart-stopping-well, there's no specifics on pricing yet, but I can tell you that I was told the pricing will be between the VMR CSL style wheels and the VMR V715. For those Velocity fans, you know that for four wheels, a price range like that is unbeatable! Of course, these wheels are VIA and JWL certified for quality assurance.


Their next upcoming product was the Integrated Vent Gauge (IVG), which was actually already out for the Volkswagen! The IVG will be available soon for the BMW 335 as well with a retail price of $199! Of course, Velocity has not forgotten about other popular makes,
such as Subaru and Mitsubishi. The estimated time of availability for the IVG is Summer of 2008.
Not only did they have new products, but they have a more updated line on the RS4 style wheels as well as their V714. Their RS4 style wheels will soon come in 18" setups for the Audi A3s, which is big news for the Audi fans that love the look of the RS4 wheels. For the V714, there will be a new size for them-20" V714s. Currently, they have the 20x8.5" V714s, non-staggered, with low offsets (ET15) in stock. They do have future plans for the staggered setup, completely the 20" sizes with a 20x10" rear wheel.
Velocity has been quite a tease while I took a look around and talked to them about what they will have available. Everything may not be available yet, but they will be soon. One thing for sure, you can be assured that ModBargains will be the first to have these ready for your wheel needs in the near future!
Keep your eyes open and come back to our site often. As soon as these are available, you can get your hands on one through us.

http://www.modbargains.com/images/Bimmerfest 2008/Velocity Motoring/DSC_0181.jpg
More images in the article here: http://www.modbargains.com/showpages.aspx?pid=1289
 

·
Registered
Joined
·
156 Posts
Just letting you guys know - I got 2 sets of hypersilver coming in , for E60 fitment staggered.

Price is $999 - Special promo for those who want to pre-order Free shipping on the wheels or Free Mounting & Balancing

It's going at first come first serve basis. So if you guys want you can email me [email protected] with any wheel and tire quotes or just give us a call here.

Thanks guys, just wanted to give the board first shot at getting the first allocation coming in mid July - next shipment is in August.
 

·
Registered
Joined
·
117 Posts
Are the offsets going to work? ET20 in front will require a good-sized spacer to achieve max push (20mm), however the rear ET22 should work great.

Wheels look great! Now make tell VMR to make them in 20's or you won't get much M5 action. :hihi: The non-M5 E60 guys might be more likely to bite, though. Personally, I love them...HRE P40's without the price tag.

Hopefully some other finishes will be available soon??? Gunmetal or Hyperblack or Brushed?
 

·
Registered
Joined
·
703 Posts
Agreed... 20 and 21" options please :)
 

·
Registered
Joined
·
156 Posts
Are the offsets going to work? ET20 in front will require a good-sized spacer to achieve max push (20mm), however the rear ET22 should work great.

Wheels look great! Now make tell VMR to make them in 20's or you won't get much M5 action. :hihi: The non-M5 E60 guys might be more likely to bite, though. Personally, I love them...HRE P40's without the price tag.

Hopefully some other finishes will be available soon??? Gunmetal or Hyperblack or Brushed?
19x8.5 ET25 & 19x9.5 ET22 - are the 19's size. Yes Other colors like Hyperblack, Matte Black etc, should be coming out after the initial shipment.

I will definitely be voicing out the need for 20's for you guys that seems to be what I've heard the most.

Thanks guys for the feedback.
 
1 - 5 of 5 Posts
Top