BMW M5 Forum and M6 Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
304 Posts
Discussion Starter #1
Just considering the upgrade to Eibach Roll bars,does anyone know if the front one needs the engine to be lifted up,if so by how much?

Many thanks
 

·
Registered
Joined
·
6,642 Posts
You have to drop the subframe to get the sway bar out.


Front anti roll bar "upgrade" does not make so much difference.

It is more about the rear anti roll bar...
 

·
Registered
Joined
·
304 Posts
Discussion Starter #3
Job's off,Eibach dont make them anymore for the 540/M5.

Is it possible to source a Dinan rear one in the UK?
 

·
Registered
Joined
·
561 Posts
BeastPower was selling a kit for 540/m5.
Go ask them.

I bought Eibach kit produced for 540 and fitted it to my M5. All great. Stiffer now! love it especially with Powerflex all round.
 

·
Registered
Joined
·
1,683 Posts
You have to drop the subframe to get the sway bar out.


Front anti roll bar "upgrade" does not make so much difference.

It is more about the rear anti roll bar...


how long would a subframe drop take raikku? 1hour or is it a serious job? no clue about it.

ordered a shnitzer set (made by eibach)some weeks ago, its in transit for now.
 

·
Registered
Joined
·
561 Posts
Drop takes about 2-3 hours.
 
  • Like
Reactions: nerio02

·
Registered
Joined
·
1,683 Posts
thats out and back in then or just taking it off?..sounds like a massive job then .

thanks for the fast response.two thumbs up.
 

·
Registered
Joined
·
561 Posts
that is time needed for off and on :0 you're welcome!
 
1 - 8 of 8 Posts
Top