Euro Clear "angle eyes" upgrade question
I decided to do my first mod on my beast by upgrading headlights to Euro "angel eyes". Installation went quite smoothly (~1hour) with instruction from bmwtips.com I used 22Gauge wires to splice harnesses to have halo rings active. But when I turn the light on, all lights worked fine except for the halo rings hmmm My initial thought was that there must be a break in the wire somewhere, but soon realized the blinkers works fine which means the circuit is live....so, what gives?? I don't really care for the amber rings so I can keep it as is, but just curious to what I have done wrong :biggrin:
Any thoughts?
Any thoughts?
1 - 3 of 3 Posts
FIXED IT 
Yes, I spliced the wrong wire. *NOTE* when splicing 4 wire harness, make sure to splice #1, #2, #4 wires not #3 wire! (look closely and you'll see wire terminal numbers on harness).
Also, it's a good idea to solder wires together and use heat shrink tubes.
Yes, I spliced the wrong wire. *NOTE* when splicing 4 wire harness, make sure to splice #1, #2, #4 wires not #3 wire! (look closely and you'll see wire terminal numbers on harness).
Also, it's a good idea to solder wires together and use heat shrink tubes.
Attachments
1 - 3 of 3 Posts
