BMW M5 Forum and M6 Forums banner

1 - 16 of 16 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter #1 (Edited)
With the price of gas so high, we figured we could help out and offer an extra special summer discount on our M5/M6 software!


Here is the original thread which has a ton of info for those of you not familiar:
http://www.m5board.com/vbulletin/showthread.php?t=114617

Please read through this as it will answer many questions!

Here are the specs:

-Raised Rev Limiter to 8400RPM (optional 8500RPM)
-Removed Top Speed Limiter
-Remapped and Improved Engine Parameters, including timing, fueling, and VANOS operation
-Improved Throttle Response
-Improved Torque Management Programming
-Optimization for either 91 or 93 octane gasoline
-Ability to request a CEL delete in case of exhaust modifications
-Custom tweaking based on your current/future modifications (cams, headers, etc)
-Country/BMW software version independent - we can program EVERY car
-SMG will shift for you at redline in automatic mode. For those of you with a 3.91 differential, this is a huge benefit!

Some questions:

What happens if the dealer flashes my car and overwrites the ESS software?
We'll reprogram it for you free of charge, less any shipping!

Retail pricing on this software is $1295.
Introductory pricing on the software through m5board was $1149.

SUMMER SPECIAL PRICING IS ONLY $999!
This offer is valid through August 31st, 2008!

Please add your name to the list if you are ready to go. Turn around time for shipped ECU's is normally 1 business day. Please feel free to PM me on the board or email me at [email protected] if you have any questions. We GUARANTEE YOU WILL BE SATISFIED!

Here are some of the reviews of our software from M5Board members who already have an ESS equipped beast:

http://www.m5board.com/vbulletin/sho...95&postcount=6
http://www.m5board.com/vbulletin/sho...74&postcount=1
http://www.m5board.com/vbulletin/sho...06&postcount=1
http://www.m5board.com/vbulletin/sho...0&postcount=10
http://www.m5board.com/vbulletin/showpost.php?p=1306794&postcount=1
http://www.m5board.com/vbulletin/showpost.php?p=1306794&postcount=1
http://www.m5board.com/vbulletin/showpost.php?p=1295459&postcount=8
http://www.m5board.com/vbulletin/showpost.php?p=1298480&postcount=14
http://www.m5board.com/vbulletin/showpost.php?p=1300626&postcount=22
http://www.m5board.com/vbulletin/showpost.php?p=1307009&postcount=73

Please take the time to look through what everyone is saying about it!

ESS Official Site Link: http://esstuning.com
ESS M5 E60 Software Link: http://esstuning.com/default.asp?c=s...subcat2=266&id=


Add your name to the list if you are ready to go!!! No limit!

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
(please add more #'s if need be in your post)

For those of you with E39 M5's, the software is priced at $499 + shipping (normally $599). You can find more info on the esstuning.com site.

Please feel free to email/PM if you have any questions. I prefer that you email me at [email protected] over PM, because it is easier for me, and you will get a faster response (comes to my PDA).

Thanks everyone and happy ESSing! :M5launch:
 

·
Registered
Joined
·
45 Posts
Discussion Starter #4 (Edited)
I also wanted to mention, this is not technically a "group buy" (it won't let me change the title).

The price is good for everyone; it does not require a minimum amount of people to receive the special.
 

·
Registered
Joined
·
287 Posts
so todd, this require removal of the ecu? is this a PIA?

also, would rpi scoops and eisenmann exhaust require a different program than the base program?
 

·
Registered
Joined
·
45 Posts
Discussion Starter #6
so todd, this require removal of the ecu? is this a PIA?

also, would rpi scoops and eisenmann exhaust require a different program than the base program?
Removing the ECU is a simple process. I can supply instructions.

RPi scoops and aftermarket exhaust do not require specific software but will provide benefits as they do to a stock car.
 

·
Registered
Joined
·
8,153 Posts
Todd,

Are we seeing some of your cars at Mfest? I can't wait to see Rom3n's Z4MC in action!
 

·
Registered
Joined
·
287 Posts
hey todd, i've only had the car back for a few days and less than 100 miles, but i'm very happy with the results. throttle response is much improved and there is some noticeable torque down low and through the mid-range which was lacking previously. i haven't done any high speed runs, but in my short jaunts to 90 or so, it pulls like a freight train in conjunction with the rpi scoops. thanks for all your assistance.
 
1 - 16 of 16 Posts
Top