Joined
·
29 Posts
Hey guys, just wondering what should a healthy stock US E28 M5 put down on the dyno? Also any tips on the strap points, especially on the rear? thanks
The guy is asking for Stock US S38-B35.Did you see this a few posts down from yours.
http://www.m5board.com/vbulletin/e28-m5-discussion/167299-m5-dyno-runs-us-car.html
My question has been answered.Hear is the dyno from my E24 M6 '88.
-Turner Chip.
-A100 Sprocket/Cam gear.
I pulled 226 RWHP with 15% drive drain loss I will say it comes up to crank 260hp. Bone stock is 256HP at the crank.
So, 4hp gain from a chip and through the RPM band its a lot better drive-ability compare to stock.
Anri