BMW M5 Forum and M6 Forums banner

1 - 14 of 14 Posts

·
Registered
Joined
·
90 Posts
Discussion Starter #1
Dinan's High Flow Air Mass Meter and Intake Assemblies used for about 1000 miles and in excellent condition

Dinan's High Flow Air Mass Meter and Intake Assemblies reduce the intake restriction presented by the stock configuration for a better breathing engine. Increasing the flow of cool, oxygen rich air increases power output by 21 horsepower, as well as providing improved throttle response. The Dinan® High Flow Air Mass Meters are also included, providing a full 22% increase in air flow.

The stock air filter housings are replaced with Dinan's larger volume units that have been designed to accommodate oval shaped filters, providing greater surface area for superior flow. The intake enclosures also include the activated carbon absorption material, providing the same function as the stock configuration without the significant restriction to air flow. The Dinan® air boxes are completely sealed enclosures, virtually eliminating the pressure drop measured with the stock units. The sealed enclosures also insulate against power-robbing heated air under the hood for maximum power output.

The carbon fiber air box lids are both functional and a handsome addition to the engine compartment. The weave perfectly matches the Dinan® front strut tower brace for a very tasteful high performance look.

Benefits:
• Improved Air Flow
• Cooler Air Into Engine
• Improved Throttle Response
• Larger Air Filters
• Completely Sealed
• Carbon Fiber
• 21 Horsepower @ 7500 rpm
• 14 Lb-Ft of Torque @ 7500 rpm

$899 shipped free in the cont USA
 

Attachments

·
Registered
Joined
·
437 Posts
hihi
could you make more pics please ? shipping to KZ zip 010000 ?
thanks
 

·
Registered
Joined
·
90 Posts
Discussion Starter #3
here is one more, PM me your email and ill send you better ones... shipping is about 120 USD

let me know if that is all fair to you

thanks
 

Attachments

·
Registered
Joined
·
3,033 Posts
Doesn't look like you have the extra hoses which connect the radiator ducts to the brake ducts in order to provide more air to the airboxes?
 

·
Registered
Joined
·
3,033 Posts

·
Registered
Joined
·
3,033 Posts
Wait...Dinan recently dropped their prices on quite a few of the e6x M mods. Even their exhaust systems,underdrive pulley, and suspension bits all dropped in price.

I swear just a day or two ago the intakes were $1,899 so the OP's claim is valid.
MONOBALLS ONLY FOR $500?!?!?! THEY WERE $750 JUST TWO DAYS AGO! That I know for a fact!
 

·
Registered
Joined
·
3,033 Posts
"WAS" valid... too bad for him. hiha
Ruthless haha

Anyhow, GLWS. FWIW, the kit for all the extra intake hoses and brackets and what not used to be ~$180. Not sure what that extra accessory kit is priced at currently now that Dinan has seemed to have dropped a lot of its prices.
 
  • Like
Reactions: bsze

·
Registered
Joined
·
1,589 Posts
Ruthless haha

Anyhow, GLWS. FWIW, the kit for all the extra intake hoses and brackets and what not used to be ~$180. Not sure what that extra accessory kit is priced at currently now that Dinan has seemed to have dropped a lot of its prices.
I dont think they will discount it by much. I rather get a brand new set for a little more and not have to deal with headache trying to source parts to complete the kit. Dinan runs 15-20% off sale every 2-3 months.
 

·
Registered
Joined
·
1,916 Posts
MONOBALLS ONLY FOR $500?!?!?! THEY WERE $750 JUST TWO DAYS AGO! That I know for a fact!

Yep. Been eyeing those.


Sent from [url=http://www.
 
1 - 14 of 14 Posts
Top