BMW M5 Forum and M6 Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
486 Posts
Discussion Starter #1
Good afternoon all! I'm having a problem with the Coolant Level Sensor! it shows on the OBD that the coolant is low but it isn't it on the full mark! i've changed the sensor but it still intermittantly shows a low level?

Please could someone advise on a possible fix

Thankyou in advance

Paul
 

·
Registered
Joined
·
763 Posts
Check the terminals and wiring for corrosion or a break.
 

·
Registered
Joined
·
7,668 Posts
Agree with Bob .

Slide the black plastic cap off the terminals and give them a clean .

If this doesn't solve problem , check the wiring and finally the white plastic float that goes inside the expansion tank .

D
 

·
Registered
Joined
·
486 Posts
Discussion Starter #4
Thankyou I'll have a look at the terminals and the wiring. Thankyou
 

·
Registered
Joined
·
388 Posts
I get the same problem and have replaced the float. Mine must be the wiring then as i have checked the terminals.
 
1 - 5 of 5 Posts
Top