BMW M5 Forum and M6 Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
I just found a “bubble” in the clear coat of the carbon fiber top.
Any ideas on how to fix this.
 

·
Registered
2009 BMW E63 M6, Sapphire Black
Joined
·
116 Posts
I just found a “bubble” in the clear coat of the carbon fiber top.
Any ideas on how to fix this.
I ran across a thread somewhere about someone fixing this. was looking for potential issues to look out for before I bought my M6. It was in that spirit that I found it. might try a google search.

Here is one for example.

 

·
Registered
Joined
·
17 Posts
If you catch it early, you can have it feather sanded and reclear coated. I did not react early on mine and ended up pulling the full gel coat top up in large sheets in about two minutes. I had it wetsanded and re-clear coated. Just make sure you get a good UV protectant clear, or else you will run into the issue again more than likely. Also, make sure they do several THICK coats, then wetsand, buff, and polish. Good luck.
TcFII
 
1 - 3 of 3 Posts
Top