BMW M5 Forum and M6 Forums banner

Search results

1-20 of 134 Results
Advanced Search
  1. Euro-spec. Center console Armrests in Leathrette/Leather also in Caramel.

    Parts / Other For Sale or Wanted
    Ok, please let me know when you do.
  2. Euro-spec. Center console Armrests in Leathrette/Leather also in Caramel.

    Parts / Other For Sale or Wanted
    I'm interested in a slide/tilt open armrest with the storage tray, but in Caramel.
  3. OEM jack

    Parts / Other For Sale or Wanted
    PM sent.
  4. Walkthrough/guide for a catch can setup?

    E39 M5 and E52 Z8 Discussion
    Thanks everyone, especially Kevin for the pictures. This is as "easy" as I figured it would be i.e. remove oil separators, route lines from crankcase to can, lines from can to plenum, and cap off the 2 lines that drain into the sump. The only hard part will be getting lines connected so there...
  5. Proper camber and toe settings?

    E39 M5 and E52 Z8 Discussion
    That makes perfect sense. Thanks for the explanation! I'll definitely be going to the alignment shop with these camber and toe-in numbers in hand.
  6. 295 fitment?

    E39 M5 and E52 Z8 Discussion
    Totally unrelated, but are those Eisenmanns?
  7. Walkthrough/guide for a catch can setup?

    E39 M5 and E52 Z8 Discussion
    That will help, thanks! So you'd have to plug both the hole on the bottom of the plenum as well as the hole in the timing cover. I can't find the diagram of where it is on the timing cover that it connects to, though.
  8. 295 fitment?

    E39 M5 and E52 Z8 Discussion
    It's not probably 100% comparable, but I would guess that 295/30 on a 19x10.5 wheel will NOT work without rolling and likely pulled rear fenders from having to use spacers based on what I've seen. I'm in the middle of sorting out my setup right now, and 285/35 on a 18x10 ET25 just BARELY works...
  9. 100 cell or 200 cell Mil.Spec cats?

    E39 M5 and E52 Z8 Discussion
    I hope to be there sometime Friday, actually. Would love to check out your setup, as that's what I'm looking for i.e. some of the edge taken off but not completely removed. Volume is a minor concern too, but hopefully retaining the stock resonators along with Eisenmann race cans will keep the...
  10. Proper camber and toe settings?

    E39 M5 and E52 Z8 Discussion
    Ok, so slightly more camber than me. Why the toe-in both front AND rear though? From what I read you want just the slight bit of toe-in on the front when running a non-staggered setup.
  11. Proper camber and toe settings?

    E39 M5 and E52 Z8 Discussion
    I will be running on 18x10 with 275/35 and 10mm spacer front, and 285/35 and 3mm spacer rear, and was wondering what would be a good setting for camber and toe. Did some digging around and I understand that for cornering and handling I do want some negative camber, and that for high speed...
  12. 100 cell or 200 cell Mil.Spec cats?

    E39 M5 and E52 Z8 Discussion
    Would their 100 cell cats be sufficient for cutting down smell a bit on our beasts or should 200 cell cats be used instead? I don't need to get rid of the smell entirely, just looking for a slight reduction as having a gotten a whiff of a decatted beast it's a bit much for me compared to my...
  13. Got my headers back from Swaintech, results and PRICING inside.

    E39 M5 and E52 Z8 Discussion
    It might as it doesn't look like there is a washer that sits under the copper collar nut that screws on to the stud bolts. RealOEM.com - Online BMW Parts Catalog
  14. Walkthrough/guide for a catch can setup?

    E39 M5 and E52 Z8 Discussion
    So in the diagram, those 2 ports by #11 are what should get sealed off? What about hose #12?
  15. Walkthrough/guide for a catch can setup?

    E39 M5 and E52 Z8 Discussion
    Yep, that's why I want to use a catch can setup so that dirty oil isn't going back to the sump and oil vapors aren't getting pulled into the plenum/intake manifold.
  16. Walkthrough/guide for a catch can setup?

    E39 M5 and E52 Z8 Discussion
    Is there a guide or pictorial walkthrough or steps for what needs to be done to properly install one and get rid of the oil separators and associated hoses/plumbing? Looking at the diagram in the link below, I would think the easiest thing to do would be to route 2 lines from the top of...
  17. Maintenance and cooling system refresh

    E39 M5 and E52 Z8 Discussion
    Great suggestion, thanks! Anyone have thoughts on the kit from ECS?
  18. Maintenance and cooling system refresh

    E39 M5 and E52 Z8 Discussion
    I'm working on my list of stuff to get done/replaced/etc in anticipation of a very long roadtrip in a few months (somewhere around 5-6k miles), but also to make sure she's running tip-top for getting tuned next month after headers are installed. So I figured I would ask to see if you guys...
  19. E39 (96-03) For Sale BMW E38/E39 Rear Axle/Differential Bush Tool

    Parts / Other For Sale or Wanted
    E-mail sent for the diff bushing tool.
  20. Got my headers back from Swaintech, results and PRICING inside.

    E39 M5 and E52 Z8 Discussion
    I figured I would post this as a reference for others. Reason being is that when I was looking into getting this done, I couldn't find a single post on the forums anywhere about what it actually costs. Just a bunch of vague guesses and estimates that posters were given by Swaintech. Most of...
1-20 of 134 Results
Top