FS: E39 M5 Magnaflow 14815s - The Unofficial BMW M5 Messageboard (m5board.com)

Carbon01 · 15th January 2008, 22:36

One set of stainless Magnaflow 14815s (3" tips) (with mounts) already set up for direct install into your M5. One month old and about 1k miles. Mounted high and tight, perfectly centered in the valence opening. Three mounting points in the factory locations, rock solid and done by one of the better shops in Austin (over $300.00 for the installation). Just cut and go as it includes the head pipes that tie in to your stock exhaust near the rear axle.

The 14815 stock 2.5" inlets were removed and correct 2.75" size pipes were welded to the enlarged inlet area.

Excellent condition, as they are near new, never been in rain, etc.
They've just broken in and sound great. If you are local, you are welcome to drive and listen.

Let me know if you have Qs.

200.00 OBO

Finesta101 · 15th January 2008, 23:34

I would take the for $100 shipped, i know it might no be worth it for you but i can get the set for $200 brand new

your set includes 2 mufflers right?

desaille · 15th January 2008, 23:49

How much shipped to 97225

Any pics?
Since they are all ready to mount, it should be straight forward swap correct?

Carbon01 · 15th January 2008, 23:52

I appreciate the offer, but will probably hold off at this time.

While they are available for 200ish new (these were 241.00), there is time and cost (in this case 328.00) in measuring and welding the brackets to allow them to mount in the correct factory positions. They may only be worth 100.00, but I think they have to be worth something more. 200.00 for a direct bolt exhaust system seems pretty reasonable for an M5, but I suspect I'll know in a week or so if its too high.

And yes, this includes both mufflers.

Best regards,

azaytsev · 15th January 2008, 23:53

Quote:

Originally Posted by desaille

How much shipped to 97225

Any pics?
Since they are all ready to mount, it should be straight forward swap correct?

you need to weld them

Carbon01 · 15th January 2008, 23:53

I'll post pics later this evening.

desaille · 15th January 2008, 23:59

I've got some slip joints\clamps (whatever you call them) for joining and am hoping that I can just get the shop to enlarge one side of the pipes and then clamp them down.

otherwise welding it would be

Carbon01 · 16th January 2008, 00:01

They are already enlarged to slip over the stock exhaust, though mine were welded.

00imolaM5 · 21st January 2008, 06:29

What is the status? Sold or available ? May I ask why you are having them removed? Going back with stock or ????

Carbon01 · 21st January 2008, 22:47

Good afternoon,
I've been out of town all weekend hence the lack of status update.
They come off the car late this week, and then I have a couple of local central TX members who have first opportunity. Failing that I will then go through the list of out of state responders. I've returned all but three PMs, and will catch those this afternoon.

I am replacing them with a Dinan setup.

Thanks,