|Topic Review (Newest First)|
|18th May 2017 08:40 PM|
Whats up !! any members in the san jose area or northern cali.
|5th May 2017 06:29 PM|
I am Gary Riddler.
2006 E60 M5.
Collecting equity. ( No dust)
Sent from my iPhone using Tapatalk
|28th April 2017 04:19 PM|
Hi from indonesia
this is my beast
e60 m5 2007 black
-k&n typhoon intake
-bc forged wheel 20"
e61 M5 2008 interlagos blau
-dinan stroker 5.8
-dinan dif 3.91
-dinan carbon intake
-kreissieg full system
-BBS LM 20"
-wald front add on spoiler
-vorsteiner carbon rear diffuser
-hamann side skirt
-front dinan spring
-front bilstein sport shock abs
|27th April 2017 09:06 PM|
Originally Posted by Bibm5 View Post
Not Greg Smith Equipment sells 'em. Pretty sure it's the same source company as I got mine from:
Atlas® SLP-9K Commercial Grade 9K Lbs Capacity Full Rise Scissor Lift| GSES | GSES
Bets $4k you'll ever spend. Even though it goes to 6' high, in a space constrained garage, even if you can do 4' high, it's plenty to roll around under the car on a stool.
|27th April 2017 07:04 AM|
Originally Posted by whit32 View Post
I'm very interested in your lift. Could you take a pic with the car on It, can you send a link of where you got it? I've been trying to find one that fits my tight space and I don't think I've seen one like that before.
|20th April 2017 05:12 AM|
Hi, new E60 M5 owner checking in!
2008, 6MT, 62k miles, Black Sapphire over Silverstone Merino full leather. Absolutely in love. It's the 11th BMW I've owned and the best car I've ever owned (my 2002 Porsche 911 is a near-tie for best car I've ever owned).
I looked on and off for over a year for a decent 6MT. Black exterior wasn't my first choice, but the price and mileage were right, plus I was holding out for a LCI car, with full leather, non-black interior and ventilated seats.
Interestingly, this car did NOT have DSC-off enabled (06/2007 build, and DSC-off was standard in 09/2007), which is good news for the drivetrain. Had that coded in at the dealer last week. I have a lift in my garage and plan to do the rod bearings myself later this year. Had to pay the dealer to enable the DSC-off, now it's a hoot to step the back end out around corners!
I'm in Cary, NC ... any other triangle area M5 owners out there?
Notable options, pretty close to what I would have ordered if I did it myself:
2MA Manual Transmission
X2xx Full Perforated Merino Leather with Alca
4MA M Multifunction Seats with Active Width
4MF Dynamic Seat Back Width Adjustment
453 Active Seat Ventilation, Front
610 Head Up Display
737 Interior Trim Alu Shadow, Brushed
|13th April 2017 12:17 AM|
I picked up this Black Sapphire Metallic over Portland Brown Leather Interior back in late December. She had 52k miles on her which I traded the dealer for $25k. It's an SMG, with a HUD, Comfort Access, Multi Function Comfort Seats and Rear Seat Heating.
It's my DD, well 3 days a week anyway. So far I love it, except for the SMG, still trying to figure that out.
The pics are seen here with my 850CSi. It's going to be difficult for me to drive anything with less than 10 cylinders from now on.
|11th April 2017 04:01 PM|
Been lurking on the forums now for a few months, thought I'd better post.
Originally a West Australian (good to see a few Perth cars on here!) but now residing in Charlotte, NC.
2007 Silverstone E60 M5 6spd with just over 100,000miles on it and still going strong!
|10th April 2017 01:22 PM|
Originally Posted by benron_77 View Post
Are you in Perth? Just noticed the plates on the car behind the M5.
Perth Member here
|8th April 2017 09:18 AM|
I am here, new member in N Dakota.
|This thread has more than 10 replies. Click here to review the whole thread.|