BMW M5 Forum and M6 Forums banner

>>>Bimmer Retrofit - PNP cable for easy Combox installation!<<<

6K views 6 replies 4 participants last post by  khyber 
#1 · (Edited)

Good day everyone and Thank you for reading!

We are pleased to introduce our new product - PNP cable for easy Combox installation!

Historically, Combox installation was troublesome and required rewiring: you were required to unplug the cables from TCU/MULF, take out TCU/MULF, install Combox and reconnect the cables to the Combox, by unplugging and replugging individual wires in the connectros, according to the pin-out diagram.

Now, the Combox installation just got a whole lot simpler! Just remove the TCU/MULF, install the Combox and connect the cables to the Combox using a Plug-and-Play cable! Its as easy as 1-2-3!

To read more about the PNP cable for easy Combox installation, please go here: BimmerRetrofit Inc

 
See less See more
2
#2 ·
I think I may get the combox now.......
 
#3 · (Edited)
Wonderful! Please feel free to email me (eivanova@bimmerretrofit.com) with your VIN, so I can check your vehicle's options and let you know what you will need to do this upgrade! :blink:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top