BMW M5 Forum and M6 Forums banner

EVOLVE // Remote 25hp flash and limited US supply // NOW AVAILABLE!

19K views 111 replies 37 participants last post by  Mark@Evolve 
G
#1 ·
NOW AVAILABLE AND IN STOCK! Get your car evolved – from home! Introducing the evolve-R remote tuning tool, with limited units in the USA ready to ship from our newly launched US website us.evolveautomotive.com





As with all our products we have a strong emphasis on safety, and so rather than redesigning the wheel, we decided to use the same style device we have been using to tune our customers vehicles for years without issues. With updated software, the evolve-R is incredibly easy to use, safe and offers a simple and affordable way of delivering our renowned ECU files to your vehicle.

How it works:

- Install the supplied software on your laptop (Windows XP/Vista/7)
- Connect the cable to your OBD-II port and read your ECU into a file.
- Email us the file
- We tune the file, email it back and you use the evolve-R to load back into your vehicle.

You can replace your original/tune file at will, and of course if you add modifications in the future, you use the same process to load on the new file we send you.

Free valet map (3k RPM limit) with every purchase
Changing your car in the future? Get an 80% discount on the next tune (if coverage allows)
Replacing your car for the same model? Get another cable/tune for FREE
3 minute read/write – no battery worries
Safe, reliable, tested extensively
Coming soon: Datalogging & Code Clearing – free upgrades.

Visit our new US website us.evolveautomotive.com for more information >> FREE SHIPPING on all purchases!
 
See less See more
3
G
#2 ·
And the tune...

<style> <!-- /* Font Definitions */ @font-face {font-family:"MS 明朝"; mso-font-charset:78; mso-generic-font-family:auto; mso-font-pitch:variable; mso-font-signature:-536870145 1791491579 18 0 131231 0;} @font-face {font-family:"Cambria Math"; panose-1:2 4 5 3 5 4 6 3 2 4; mso-font-charset:0; mso-generic-font-family:auto; mso-font-pitch:variable; mso-font-signature:-536870145 1107305727 0 0 415 0;} @font-face {font-family:Cambria; panose-1:2 4 5 3 5 4 6 3 2 4; mso-font-charset:0; mso-generic-font-family:auto; mso-font-pitch:variable; mso-font-signature:-536870145 1073743103 0 0 415 0;} @font-face {font-family:Tahoma; panose-1:2 11 6 4 3 5 4 4 2 4; mso-font-charset:0; mso-generic-font-family:auto; mso-font-pitch:variable; mso-font-signature:-520082689 -1073717157 41 0 66047 0;} /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {mso-style-unhide:no; mso-style-qformat:yes; mso-style-parent:""; margin:0cm; margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"MS 明朝"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-ansi-language:EN-US;} a:link, span.MsoHyperlink {mso-style-priority:99; color:blue; mso-themecolor:hyperlink; text-decoration:underline; text-underline:single;} a:visited, span.MsoHyperlinkFollowed {mso-style-noshow:yes; mso-style-priority:99; color:purple; mso-themecolor:followedhyperlink; text-decoration:underline; text-underline:single;} .MsoChpDefault {mso-style-type:export-only; mso-default-props:yes; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"MS 明朝"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-ansi-language:EN-US;} @page WordSection1 {size:595.0pt 842.0pt; margin:72.0pt 90.0pt 72.0pt 90.0pt; mso-header-margin:35.4pt; mso-footer-margin:35.4pt; mso-paper-source:0;} div.WordSection1 {page:WordSection1;} --> </style> [FONT=&quot]Created with extensive research and testing the S85 V10 ECU upgrade transforms power and drivability of the V10 engine. Developed with 100's of hours of dyno testing, datalogging and endurance testing we deliver a consistent 25-30hp while retaining maximum safety margins.

The changes we make to the BMW software are developed by us in a real time environment and are unique to any other software on the market.[/FONT]


[FONT=&quot] The software is designed such that it will work with any after market cat-back exhaust system.

Some of the maps within the ECU which are modified:

- Torque Management
- Full throttle fuel
- Full throttle ignition aim
- Part throttle ignition aim
- Minimum ignition set
- Torque calculation
- RPM limiter (optional)
- Speed limiter of 250km/h removed
- Normal and sport throttle maps modified for smoother driving
- Vanos intake and exhaust
- Throttle opening maps (to achieve 100% opening)

[/FONT]







Wheel Figures:

[FONT=&quot]

[/FONT]

[FONT=&quot]
[/FONT]
Flywheel Calculated:

[FONT=&quot]

[/FONT]

[FONT=&quot]We only advertise our average figures based on the numerous runs we do in our in-house dyno. You will not find any glory run figures from us. The numbers above are based on US 93 Octane. 91 Octane maps are available upon request and yield between 15-20hp.[/FONT]

[FONT=&quot]Click herehttp://www.evolvetuning.us/bmw/5-se...0/bmw-m5-e60-05-evolver-ecu-tune-stage-1.html to visit the S85 listing on our website. Each purchase includes both the evolve-R remote tuning cable and the tune for your vehicle.[/FONT]

[FONT=&quot]We look forward to hearing from you![/FONT]
 
G
#10 ·
We are very confident of our product. Its our policy not to compare our products publicly with competing tuners, a lot of what we do you will never see. For example, we tune to the maximum output with safety at the forefront of our minds, as if it is our personal car we are tuning (and want to keep for a while).

The dyno's also only tell one side of the story, as we take average dyno run numbers and not simply the highest figure we achieved. An example being that we quote 25-30hp gains on our standard tune - yet the lowest to highest figure we achieved was over 40hp. Its unrealistic in the majority of cases but I can imagine plenty would advertise this figure.

In general I think you will find our customers are very pleased with the product they receive, and that more than anything is the most important thing when choosing a tune.

Pricing can be found on our website, for a direct link to the M5 please click here.

Thanks for the interest everyone. I've had Sal respond to your PM's due to this being a new username for me and the PM system still disabled. Please email inquiries to paul@evolveautomotive.com, thanks!
 
#12 · (Edited)
Hi,

customer service is everything. For us it's not just from a business point of view but also from a personal point of view. If our fellow car modding enthusiasts are not happy then nor are we.

A pulley does not require an additional tune due to the way it works.

Here is another dyno test on a Dynojet which was carried out on an independant dyno in Dubai on a V10 with Tubi exhaust, Pulleys and I believe Rpi Scoops:



The power gain was slightly more than we expected but it is what it is. Most likely because only 1 baseline was done on the car before the tuning was done. Realistically the tune is giving much closer to 25hp than 33hp as the car would most likely have achieved 5-8hp more had it been tested a few more times before the tune was applied.
 
#17 ·
Hi,

Notice with other vendors that they can reverse the M button so its on from starting the car, can this be implemented within the tune & done with the evolve-r product?
Ive been a past customer of Evolve (M3 exhaust :) ) and would prefer this Evolve-r option

Cheers

Steve
 
#19 ·
Great work as usual SAL :)
 
#21 · (Edited)
Or can you just program the ecu ( + the tune :) ) so that the power button is on all the time (P500 sport) from start up? not the M button.

At the moment, I just get in press the power button and press lever towards me for sequential mode.
I have the side bolsters programmed to hug me as part of the seat memory.
If i press the M button i lose the hugging of the side bolster because i have the active bolsters and there's no 'off' setting for them in the M button program.... :(
 
#29 · (Edited)
Paul, Thank you for the PM, I can't reply via PM due to low number of posts.

Sal?,

Good to hear from you again, as i'm in the UK and after you're excellent price on my last tune for the M3, can you PM me a heavily discounted :) price for the Evolve R Stage 2 tune with the M button programmed permanently on instead of the free valley map, and one normal stage 2 tune.

have sent you an email seeing as I can't reply via PM.

Thanks

Steve
 
G
#37 ·
Everything was incorportated yes :) And your tune as it is will be fine for everything apart from deletion of cats or replacing of headers. If you ever have any questions or are worried mods your considering will effect the tune just let me know and I'll answer them.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top