I would say they are rated at about 6000k to 7000k. You can stop by our shop in Tustin, CA and see if you like it. Please email me at joe@trinityautosport.com or you can call me at 714-731-2526 and I can schedule you in Thank you.
yes install is pretty easy. it does not come with an install guide, sorry, but along with other DIYs online we can always help you out over the phone or send directions through email if any assistance is needed =)
Completed the install of mine today (thanks for the help Joe).
The only problem I had with the install was the overhead console lights (3 in front and 3 in back). When I removed the light unit I assumed that lights went in from the back. I twisted the bayonette and removed the old bulb and installed the LED. The LED didn't fit in the housing. There is a lip on the housing I filed down a bit to get the LED to fit. Once installed nothing. Tried all 3 lights in the front housing with the same result.
So called Joe today to find out if I was missing something. Apparantly they have to go in thru the front. Even knowing this it was kind of a PITA. I tried a few times and couldn't get the light to light up and stay on. It would flicker but that was it. What I did find waas that the bottom of the LED where the electrodes come out is slotted. If you push the wire to the outside of the slot it has a much better chance of making conatct with the bayonette. Once I did this it was pretty easy. Definitely a good setup but I think the folks at Trinity could drop a note in the packing when they ship it about the install. It's pretty frustrating to get a kit like this with no instructions and run into a problem that could have been identified right off the bat.
Already shipped!! Now that's what I call service! Thanks again Nerwyll for the prompt response and even quicker shipping process; definitely two thumbs up for customer service! Hope to have some quality pics up of the new LED setup!
Installed my lighting set today and I ran into the same issue as Mickster994 on my overhead console lighting. Rebending the wires and wiggling the bulbs in the socket was a royal PITA but the end result is excellent. Thanks for the heads up Mickey, owe u a cold one if u ever travel to Vancouver!
Installed my lighting set today and I ran into the same issue as Mickster994 on my overhead console lighting. Rebending the wires and wiggling the bulbs in the socket was a royal PITA but the end result is excellent. Thanks for the heads up Mickey, owe u a cold one if u ever travel to Vancouver!
Just had mine installed today and they were a lot brighter than the crappy Bimmian Xenon-look bulbs I had. Great product to freshen up the interior. Thanks Joe and Weezy!
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
BMW M5 Forum and M6 Forums
3.2M posts
125.8K members
Since 2000
M5Board is the best forum community for information on the BMW M5 E60 (V-10), E39 (V-8), E34 (straight 6), E28, F90 and F10. Discuss performance, specs, reviews and more!