BMW M5 Forum and M6 Forums banner

Jlevi SW | RD Sport Race RTEM Headers For the S85 Engine *ULTRA LIMITED SPECIAL DEAL* + FREE PULLEYS

1K views 0 replies 1 participant last post by  Bryan@Jlevi SW 
#1 · (Edited)
cal@jlevisw.com | 1.888.JLEVISW | JleviSW | Your #1 Source for High-End BMW Enhancements


For pricing and ordering information, please contact us directly.


We have one set of these headers available (in stock and ready to ship) at an unbelievable special discount. Act now before its too late! :deal:


Please PM or email me at cal@jlevisw.com for this ultra mega discounted price. We will be throwing in a set of RDSport Power Pulleys ($450 value) for free with the purchase of these headers!!!!


[
RD Sport *Hand Built* Race Tubular Exhaust Manifolds (Headers) [130 08 65 902]

There is a select group of enthusiasts who expect to have the very best that money can buy. These are the kind of people who are uncompromising when it comes to quality, unwilling to accept second best, as for them only the very top performance is worth paying for.

The RDSport Race Headers were designed for this type of enthusiast in mind. The technology is the same employed on Formula One motors, where each primary is designed to match exactly in length, painstakingly built by hand, one by one, and then attached to a hand-made merge collector that is a piece of art in itself.

Unlike other systems on the market, the RDSport RTEMs are the result of many hours of engine dyno tuning and work best when installed with RDSport's Engine Management Software.

Each component is made out of 304 stainless steel, TIG welded section by section, and each weld is painstakingly back-purged to avoid long-term fatigue stress cracks. Upon special request, the RTEMs can also be manufactured out of Inconel® or titanium, although we do not recommend the latter on street applications.

The RTEMs are standard issue on our RS58 motor, and are available in select numbers for customers with standard motors. As each unit is built by hand, it normally takes approximately 4-5 weeks to build.

Further performance gains will be achieved when paired with our Engine Management Software and other S85 exhaust components.

* Up to 47 HP gains
* 100% Stainless Steel
* Made in Italy






RDSport Power Pulley Set for the M5 & M6 [131 80 85 000]
The Power Pulley is a smaller diameter pulley engineered to replace the OE crankshaft pulley. Since it is smaller in diameter, it drives the auxiliary accessories at a reduced rpm and reclaims some of the parasitic loss that is usually absorbed by driving these components.

The RDSport Power Pulley is made out of aerospace-quality 6061-T6 aluminum and is then anodized black for a factory look. It is supplied with the 2 shorter Micro-V belts that compensate for the smaller diameter of the pulley.

On the 10 cylinder M5 we have seen a consistent gain of around 12-15HP, which make the power pulley option a very effective performance upgrade.


 
See less See more
4
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top