5th May 2012, 00:46
Company Representative for RK Autowerks
Join Date: Sep 2010
2003 E39 M5 TiAg
Thanked 376 Times in 257 Posts
Raza will be checking the fit of the shroud you see below. A couple highlights from the pic, the black rubber bits are speed flaps that open when the car is moving to allow more air through the radiator than any fan can pull alone. There is a shelf for the resistor, and the OEM overflow tank bolts right in... All the bolts will be flush M6 helicoils and all hardware will be provided. Also the fan shroud itself will bolt on to your existing radiator (we may have a selection for OEM radiator and zionsville radiator...) So let me know which radiator you have in your car when you email me!
Also if all of you can email me at jamie at rkautowerks dot com to confirm that you're in. I'll email you all on a distribution list and update this thread as well. Just need to know how many shrouds, fans etc... to order!
Originally Posted by vitiokas95
Wasn't sure that list was still valid, but if it is:
4. Hillco148 (Still in)!