Evolve LHD 4-1 "Medusa" Headers - GROUP BUY

[evolve automotive]

Originally Posted by Sniper q8

they all here said you must remove the engine it will make it pretty easy

so i have no choice

you can do it without pull the engine but it will be very hard specially in the driver side

They took the engine out to fit headers........ they could have just removed the subframe at the very worst case!

We did not have a ramp available on the first car, we fitted them on the floor without removing anything. Took us less than 7 hours in total.

[Sniper q8]

^^

here they just want more money

[Sniper q8]

complete the work today

i dont like here sound its too risspy is that normal ?

anyway that isn't important

i feel a bit disappointed about the performance

i tried with my friend m5 i toke the lead but i feel not enough because his car is completely stock and also need new plugs and the other stuff

tomorrow i will put her in a dyno again to see

my last hope on software

[evolve automotive]

Originally Posted by Sniper q8

complete the work today

i dont like here sound its too risspy is that normal ?

anyway that isn't important

i feel a bit disappointed about the performance

i tried with my friend m5 i toke the lead but i feel not enough because his car is completely stock and also need new plugs and the other stuff

tomorrow i will put her in a dyno again to see

my last hope on software

I hope you have driven the car enough before you make any kind of judgement.

When any header is initially installed the car typically feels flat and lethargic. You need to drive it and drive it quite hard.

It may also be necessary to reset adaptions and drive some more.

Leave the dyno until I can do the software so we can save money and time. If any adjustments are required (unlikely) then I can do them there and then.

Do things the way we suggest and you will be happy.

Oh... and make sure the air filters are clean! We just finished a car yesterday. Gained 35hp @ 5800rpm but only 25hp @ 7000rpm!. Looked at filters - very blocked.

Your car doesn't really have any other real performance parts on it that will make any kind of real difference so if you are beating a stock car already then your doing very well!
What does the other car need that is related to performance. Plugs won't make a difference I can tell you!

[Sniper q8]

you mean the CPU of my car don't know yet is that medusa girl is under him ;P

ok i will drive it more and see

i want to know also how much the software will give me

i don't have any adjustments same rpm 7000 i dont want to take off the limiter

what i want only is more power and make my check engine light dissapear its came because of cytelic converts were replace with decats

and of course speed limiter i want to see 300 km/h

[evolve automotive]

Originally Posted by Sniper q8

you mean the CPU of my car don't know yet is that medusa girl is under him ;P

ok i will drive it more and see

i want to know also how much the software will give me

i don't have any adjustments same rpm 7000 i dont want to take off the limiter

what i want only is more power and make my check engine light dissapear its came because of cytelic converts were replace with decats

and of course speed limiter i want to see 300 km/h

This is no problem at all.

The ECU will need to adapt.

You will get a real nice increase in power once the stage 3 software is on.

[elcabron]

Originally Posted by evolve automotive

This is no problem at all.

The ECU will need to adapt.

You will get a real nice increase in power once the stage 3 software is on.

Sal i emailed you about the software update.
Finished installing headers last night.

[Sniper q8]

Originally Posted by evolve automotive

This is no problem at all.

The ECU will need to adapt.

You will get a real nice increase in power once the stage 3 software is on.

i noticed that now i can feel the gain in power now

ok sal i will wait you

[kevinf]

My car felt very 'flat and lethargic' for the first 80 miles after the header install. At 150+ miles now (still pre-software tune) it feels at least as responsive as stock with plenty of low end power. I haven't gotten to explore the higher RPM range much yet with temps here being in the high 90s & not wanting to push the car w/ the A/C on.

I wish these things were visible from above in the engine bay!! They're so amazing looking and I can't show them off @ the weekly car meet! Maybe I could fashion an undercarriage mirror for viewing underneath

[gixxeridaz]

just ordered myn im kinda excited haha.. The only other mod i would like to do after this is the heads.... valves etc if someone could get an ascari s62 we would have something. Ive heard theres loads of power to be unlocked in the heads but iam sure the price to unlock that including r&d would make it so high tey would call it un-obtainium....