BMW M5 Forum and M6 Forums banner

Help with M6 Flywheel $$$

2K views 4 replies 2 participants last post by  autodoc 
#1 ·
Hey guys does anyone know anything about replacing the flywheel on an m6/m5? the car us a 06 with about 47k and i have been having some problems with the clutch and getting the dealer to cover it, i have just about given up and i called parts to get the price of the clutch witch i was ok with but then he said he recommended doing the flywheel while i was in there, the part lists for 1600!!

on another not should a experience mechanic that has about 25 years experience building and racing nissan and toyota engines be capable of doing a clutch in our cars or is there software options that would be needed??
 
#2 ·
most times we just machine flywheel or clean up surface with reconditioning disc.....normally only replace flywheel if it is damaged or worn from abuse....without seeing flywheel cannot tell.....does clutch slip badly,chatter or make odd noise....what is problem you are having? It is pretty straightforward repair. Just costly.
 
#3 ·
yea the car chatters going into first and then it slips at the higher rpm's and between gear shifts, thanks for the info!!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top