A couple of weeks ago , the charcoal filter was removed and at the same time the Dixis Ti V2 was installed. And so was the Ti X pipe.
I have to admit that the difference was noticeable. For one, the car definitely feels smoother , low, mid, and high ends. For two, it took a dump and lost more than 40-60 lbs , i think. (since the Ti exhaust is so frickin lite:lightbulb.
Btw, it sounds grrreat...
Now , the next mod that i was thinking about was the EVO PULLEYS. A couple of board members tell me that i should go ahead and do it. BUT i what i really want to know is both the Pros/Cons.
Are there any issues associated with this mod?
Will the dealership know that the pulleys have been changed?
Any kind of honest info would help here guys.
:confused3
RPi dynodynamics dyno shows no significant gains from the
pulleys. From my understanding they've run many cars and
the results are always the same. I'm not sure if it's because
of the type of dyno or what. A dynojet seems to show gains.
Dynojets are notorious for showing much higher readings that
dyno dynamics/mustag dynos. Here is some dynojet numbers
which measure hp/tq differently:
Be careful how you read this as the first dyno shows stock vs.
pulley, exhaust, charcoal filters. The final results show something
like a 16hp/18tq. Also see that there was NEVER a before
dyno run on the same day so the numbers can be very misleading.
If someone could do a before/after pulley only dyno and post the
results that would be great.
I'm interested as well. I've already researched the many threads on this but couldn't find any install information. Anyone know where I can get these installed for a reasonalbe price in CA specifically around the LA area? Does Eloy @ RPI install pullies as well? I'm going to pull the trigger as soon as my end of the year bonus check comes in!
I just did a 300 mile trip from NY to MD and then back again. The car really wants to run with the puley. No noticable difference on anything else. As others have said, the steering may tighten a touch, but in my opinion, that is an added plus. I have not notice any difference at all in the operating temps.
We got 1 set in stock guys! Please PM me for more information.
Ed @ SP-POWER
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
BMW M5 Forum and M6 Forums
3.2M posts
125.8K members
Since 2000
M5Board is the best forum community for information on the BMW M5 E60 (V-10), E39 (V-8), E34 (straight 6), E28, F90 and F10. Discuss performance, specs, reviews and more!