M5 in dash rocker switch installation for Lidatek LE-20
This shows the pop-out panel from the left of the foglight switch. The rectangular hole was cut with a dremel tool, and the edges filed.
Measurements are distance from hole to edge. Narrow edges are 3mm wide. Top and bottom are 10mm wide.
Switch is a 12 volt lighted mini rocker switch.
Showing switch inserted into the pop-out.
Showing wiring for the rocker switch to operate the Lidatek LE-20.
Terminals are numbered, bottom to top:
#3 is white wire to transponder (also connects to black speaker wire).
#2 is red wires to transponders and speaker
#1 is power (connects to fuse)
Showing switch and pop-out mounted in the dash panel. Switch turns on/off Lidatek and illuminates to indicate transponder alert.