Quote:
Originally Posted by huntercross
I am going to take my plenum off in the next couple of days to try to clean out the idle control valve (my idle fluctuates a bit) and replace the throttle valve switch. (is there 1 or 2?)
My question is, do I need to replace any of the plenum or throttle body gaskets when doing this? Also, any insight to cleaning out the idle control valve or replacing the throttle switch would be appreciated.
|
I think depend on the condition of the rubber gasket. If it is deteriorating then you should replace it.
On mine I did not replace mine as the intake plenum gasket still in good condition (when I replaced the "fuel tank breather valve" under the plenum).
Regardz,
J Irwan