View Single Post
Old 12th September 2008, 10:19   #11 (permalink)
507hp M6
Member
 
Join Date: Sep 2007
Location: LA
Posts: 46
Thanks: 0
Thanked 5 Times in 3 Posts
Quote:
Originally Posted by m2m View Post
Im trying to remove the front grill but im scared im going to use too much force and snap the clips. I can see the three bottom clips through the grills, do i press down on them or lift up on them to release the grill? I cant seem to get them off
Man I feel bad for you. I was in the same position last night. So listen and take my advice.

1) Open the good and remove what I remember to be about 8 screws that hold the front bumper on.

2) Pull the bumper a little bit forward (The area of the bumper that we're playing with can bend a lot)

3) Get a long screw driver, put it n between the frame and the bumper and pull the little black tabs located on the top for the grill, while you pull the grill out with the other hand.

4) One the top 3 clips are removed, the bottom ones should be simple. You just want to push those up toward the sky.

The second drill should be much much easier because one the first one is gone you can out you hand in their.

Good luck
507hp M6 is offline   Reply With Quote
 
Page generated in 0.12197 seconds with 9 queries