View Single Post
Old 15th March 2002, 02:13   #2 (permalink)
JFB
m5board.comoholic (>1000 posts)
 
JFB's Avatar
 
Join Date: May 2001
Location: Texas, USA
Posts: 1,361
Thanks: 0
Thanked 1 Time in 1 Post
Car Memory

Here's the Car Memory list provided to me by my service representative. The factory default setting is underlined.

The Key Memory List is in the posting below.

Daytime Running Lights
When active: low intensity high beams automatically turn on when the ignition is on, enhancing visibility to other vehicles.
  • Not active
  • Active
Pathway Lighting
When active: by quickly flashing the highbeams after the ignition is turned off, the headlights remain on for about 40 seconds.
  • Not active
  • Active
Driver's Seat Position Memory
When active: the car automatically duplicates the same driver's seat position settings as the last time that particular key was used (included with each remote control key, activated by locking or unlocking the door).
  • Not active
  • Active (when unlocking the car)
  • Active (when opening the driver's door)
Armed Alarm Confirmation Signal
Alarm acknowledgement can be both visual and audible (signal lights flash and siren "chirps"), or only visual (signal lights flash).
  • Arm/Disarm confirmed both visually and audibly
  • Arm/Disarm confirmed visually only
__________________
Jim
2001 ///M5 Royal Red / Caramel

Last edited by JFB; 15th March 2002 at 02:26.
JFB is offline   Reply With Quote
 
Page generated in 0.06989 seconds with 9 queries